Configuring Spcp On The Cisco Spa 525G - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Configuring SIP, SPCP, and NAT

Configuring SPCP on the Cisco SPA 525G

STEP 5
Configuring SPCP on the Cisco SPA 525G
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Auth ID
Mini Certificate
SRTP Private Key
Click Submit All Changes.
The Cisco SPA 525G can be used as part of a Cisco Unified Communications
System. This system uses SPCP (also called SCCP) for call control features.
To configure SPCP on the Cisco SPA 525G:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Under System Configuration, in the SPA525-protocol field, choose SCCP.
(Optional) To configure the phone to automatically detect the protocol being used
on the network to which it is connected, in the SPA525-auto-detect-sccp field,
choose yes.
Click Submit All Changes.
Description
Authentication ID for SIP authentication.
Defaults to blank.
Base64 encoded of Mini-Certificate concatenated with the
1024-bit public key of the CA signing the MC of all subscribers
in the group.
Defaults to blank.
Base64 encoded of the 512-bit private key per subscriber for
establishment of a secure call.
Defaults to blank.
4
103