Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 214

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Info Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Decode Latency
Jitter
Round Trip Delay
Packets Lost
Packet Error
Mapped RTP Port
Media Loopback
Loss Rate
Discard Rate
Burst Duration
Gap Duration
Description
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Number of milliseconds for delay.
Number of packets lost.
Number of invalid packets received.
The port mapped for Real Time Protocol traffic for the
call.
If the call is a loopback call, displays the loopback mode
(source or mirror) and type (media or packet). If the call
is not loopback, the field appears blank.
The fraction of RTP data packets from the source lost
since the beginning of reception. Defined in RFC 3611—
RTP Control Protocol Extended Reports (RTCP XR).
The fraction of RTP data packets from the source that
have been discarded since the beginning of reception,
due to late or early arrival, under-run or overflow at the
receiving jitter buffer. Defined in RFC 3611—RTP
Control Protocol Extended Reports (RTCP XR).
The mean duration, expressed in milliseconds, of the
burst periods that have occurred since the beginning of
reception. Defined in RFC 3611—RTP Control Protocol
Extended Reports (RTCP XR).
The mean duration, expressed in milliseconds, of the
gap periods that have occurred since the beginning of
reception. Defined in RFC 3611—RTP Control Protocol
Extended Reports (RTCP XR).
B
203