Installing The Firmware; Cisco Spa 500 Series And Wip310 Ip Phone Administration Guide - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Getting Started
Upgrading Firmware
STEP 3
STEP 4
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2

Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Locate the download page and download the firmware file.
If the firmware file you download is in zip format, double-click the file and extract
its contents to a single folder or to the desktop.

Installing the Firmware

Your computer must be on the same sub-network as the phone you are upgrading.
Cisco SPA 50XG:
Run the executable file for the firmware upgrade.
Click Continue after reading the message regarding upgrading and your service
provider.
Enter the IP address of your phone.
Follow the on-screen directions.
Cisco SPA 525G
Log in to the web interface for the phone.
Choose the Firmware Upgrade tab.
Click Firmware Upgrade Window.
Browse to select the firmware file from your PC. Click Submit. The firmware is
installed and your phone reboots.
WIP310
Turn off your WIP310 and connect it to your computer by using the USB cable.
Double-click the executable file for the firmware upgrade (for example, double-
click wip310-5-0-11.exe).
1
10