Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 224

Cisco SPA 500 Series and Wireless IP Phone Field Reference
SIP Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Escape Display Name
SIP-B Enable
Talk Package
Hold Package
Conference Package
Notify Conference
RFC 2543 Call Hold
Random REG CID On Reboot
Description
Lets you keep the Display Name private. Select yes if
you want the IP phone to enclose the string (configured
in the Display Name) in a pair of double quotes for
outbound SIP messages. Any occurrences of or \ in the
string is escaped with \ and \\ inside the pair of double
quotes. Otherwise, select no.
Defaults to yes.
Enables BroadSoft call features.
Enables support for the BroadSoft Talk Package, which
enables a user to answer or resume a call by clicking a
button in an external application.
Enables support for the BroadSoft Hold Package,
which enables a user to place a call on hold by clicking
a button in an external application.
Enables support for the BroadSoft Conference
Package, which enables a user to start a conference by
clicking a button in an external application.
If enabled, the unit will send out a NOTIFY with
event=conference when starting a conference.
If set to yes, unit will include c=0.0.0.0 syntax in SDP
when sending a SIP re-INVITE to the peer to hold the
call. If set to no, unit will not include the c=0.0.0.0 syntax
in the SDP. The unit will always include a=sendonly
syntax in the SDP in either case.
Defaults to yes.
If set to yes, the Cisco IP phone uses a different
random call-ID for registration after the next software
reboot. If set to no, the Cisco IP phone tries to use the
same call-ID for registration after the next software
reboot. The Cisco IP phone always uses a new random
Call-ID for registration after a power-cycle, regardless
of this setting.
Defaults to no.
B
213