Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 41

Configuring Lines and Extensions
Configuring Lines
STEP 5
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameters
Remote Ringing LED
(applicable only to
shared call
appearance)
Local Active LED
Remote Active LED
(applicable only to
shared call
appearance)
Local Held LED
Remote Held LED
(applicable only to
shared call
appearance)
Register Failed LED
Disabled LED
Registering LED
Call Back Active LED
Click Submit All Changes.
For more information on LEDs, see the
page 193.
Description
Appears when the shared call appearance is in ringing on
another station.
Defaults to blank (c=r;p=d).
Appears when the call appearance is engaged in an active call.
Defaults to blank (c=r).
Appears when another station is engaged in an active call on
this shared call appearance.
Defaults to blank (c=r;p=d).
Appears when the call appearance is held by this station.
Defaults to blank (c=r;p=s).
Appears when another station places this call appearance on
hold.
Defaults to blank (c=4,p=s).
LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank
indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
Appears when the corresponding extension tries to register
with the proxy server.
Defaults to blanks (c=r;p=s).
Indicates Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
"Creating an LED Script" section on
2
30