Configuring Back Light Settings (Cisco Spa 525G); Configuring Linksys Key System Parameters - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Linksys Key System Parameters

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Configuring Back Light Settings (Cisco SPA 525G)

To configure the back light settings for the LCD screen on the phone:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the User tab.
Under Screen, in the Back Light Enable field, choose yes to enable the screen
back light.
In the Back Light Timer field, enter the number of seconds of idle time that can
elapse before the back light turns off.
Click Submit All Changes.
To configure the phone as part of a Linksys Key System (for use with the Cisco
SPA 9000):
Log in to the web administration interface.
Click Admin Login and advanced.
Click the SIP tab.
Configure the following fields:
• Linksys Key System—Enables or disables the Linksys Key System for use
with the Cisco SPA 9000. Defaults to yes. See the
Administration Guide
• Multicast Address—Used by the Cisco SPA 9000 to communicate with
Cisco IP phones. Defaults to 224. 1 68. 1 68. 1 68:6061. (For the Cisco SPA
501G, can be configured using the IVR. See the
SPA 501G IP Phone" section on page
• Key System Auto Discovery—Enables or disables auto discovery of the call
control server (for example, the Cisco SPA 9000). Disable this feature for
teleworkers or other scenarios where multicast does not work.
for more details.
17.)
Cisco SPA 9000 System
"Using IVR on the Cisco
3
40