Speed Dial; Supplementary Services; Camera Settings; Web Information Service Settings (Cisco Spa 525G) - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
NOTE
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Speed Dial

Speed Dial 2 through 9: Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Defaults to blank.
Speed dial configuration has its own tab on the Cisco SPA 525G and does not
appear in this section on the WIP310. Speed dial configuration from the WIP310 is
done on the phone. You can also configure speed dials on the Cisco SPA 500 Series
IP phones; see the User Guide for the phone for more information.

Supplementary Services

The IP phone provides native support of a large set of enhanced or
supplementary services. All of these services are optional. Most supplementary
service parameters are listed in
The user can enable or disable supplementary services and other settings in this
section.
A supplementary service should be disabled if the user has not subscribed for it,
or the service provider intends to support similar service using other means.
For more star code or supplementary service information, see
Supplementary Services (Star Codes), page

Camera Settings

The Cisco SPA 525G works with the Cisco WVC2300 Wireless-G Business
Internet Video Camera and the Cisco PVC2300 Business Internet Video Camera to
provide simple video monitoring from your IP phone. See
Information Into the Cisco SPA525G Web Administration Interface, page

Web Information Service Settings (Cisco SPA 525G)

These parameters apply only to the Cisco SPA 525G.
Supplementary Services, page
153.
B
252.
Configuring
Entering Camera
78.
280