Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 257

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Text Logo
BMP Picture Download URL
Select Logo
Select Background Picture
Softkey Labels Font
Description
Text logo to display when the phone boots up. A
service provider, for example, can enter logo text as
follows:
•
Up to 2 lines of text
•
Each line must be fewer than 32 characters
•
Insert a new line character (\n) between lines
•
Insert escape code %0a
For example, "Super\n%0aTelecom" will display:
Super
Telecom
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page
URL locating the bitmap (.BMP) file to display on the
LCD background.
For more information, see the
Information and Display Settings" section on
.
page 32
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page
Select from Default, BMP Picture, Text Logo, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page
Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page
Choose the font width for the softkey labels to display
on your phone. See Customizing Phone Softkeys,
page 50.
B
281.
"Configuring Phone
281.
281.
281.
246