Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 95

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter Description
SIP Reg User User-Agent name used in a REGISTER request. If not specified,
Agent Name the SIP User Agent Name is also used for the REGISTER request.
Defaults to blank.
SIP Accept Accept-Language header used. If empty, the header is not
Language included.
Defaults to blank.
DTMF Relay MIME MIME Type used in a SIP INFO message to signal a DTMF event.
Type This parameter must match that of the service provider.
Defaults to application/dtmf-relay.
Remove Last Reg If set to yes, removes the last registration before re-registering (if
the value is different). Defaults to no.
Use Compact If set to yes, the Cisco IP phone uses compact SIP headers in
Header outbound SIP messages. If inbound SIP requests contain normal
(non-compact) headers, the phone substitutes incoming headers
with compact headers.
If set to no, the Cisco IP phone uses normal SIP headers. If inbound
SIP requests contain compact headers, the phone reuses the
same compact headers when generating the response,
regardless of this setting. Defaults to no.
Escape Display Setting this parameter to yes encloses the configured Display
Name Name string in a pair of double quotes for outbound SIP
messages. Any occurrences of or \ in the string is escaped with \
and \\ inside the pair of double quotes. Defaults to yes.
SIP-B Enable If set to yes, enables BroadSoft call features. See
www.broadsoft.com
Talk Package If set to yes enables support for the BroadSoft Talk Package,
which lets users answer or resume a call by clicking a button in an
external application. Defaults to no.
Hold Package If set to yes, enables support for the BroadSoft Hold Package,
which lets users place a call on hold by clicking a button in an
external application.
Defaults to no.
for more information. Defaults to no.
4
84