Configuring The Cisco Spa 500S - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
This is entered in the file sip.conf:
[3500]
type=friend
secret=3500
callerid="spa3500"<3500>
nat=no
context=home
mailbox=3500
Subscribecontext=home
...
...

Configuring the Cisco SPA 500S

Complete the configuration required for the extensions on your IP PBX and obtain
the following information:
• IP PBX IP address or other hostname
• Phone extension numbers
To configure the Cisco SPA 500S:
Steps 1 through 4 are only required when the
These steps are not required for other server types such as BroadSoft and
Asterisk.
Connect to the web UI for the phone to which the Cisco SPA 500S is connected.
Click Admin/Advanced on the web UI page.
Click the SIP tab.
CTI Enable
Select yes from the
Click the Attendant Console tab.
Unit 1 Enable
Select yes from the
SPA 500S units, also select yes from the
Server Type
drop-down list.
drop-down list. If you have installed two Cisco
Unit 2 Enable
9
field is set to SPA9000.
drop-down list.
185