Enabling Call Features; Enabling Anonymous Call And Caller Id Blocking - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual
Small business pro
Hide thumbs
Also See for WIP310 - iPhone Wireless VoIP Phone:
- User manual (88 pages) ,
- Administration manual (371 pages) ,
- Provisioning manual (116 pages)
Table of Contents
Advertisement
Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
STEP 5
Enabling Call Features
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 5
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
•
Key System IP Address—IP address of the call control server IP. Enter the IP
address for teleworkers or other scenarios where multicast does not work.
•
Force LAN Codec—Used with the Cisco SPA 9000. Choices are none,
G.711u, or G.711a. Defaults to none.
Click Submit All Changes.
This section describes how to enable and disable call features on the phone.
Enabling Anonymous Call and Caller ID Blocking
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, under the type of call blocking to enable, choose
yes.
•
Block ANC—Blocks anonymous calls.
•
Block CID—Blocks outbound caller ID.
These features can also be configured from the User tab, under Supplementary
Services.
Click Submit All Changes.
3
41
Advertisement
Table of Contents
