Chapter 8: Configuring Dial Plans; About Dial Plans - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Configuring Dial Plans

About Dial Plans

Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Dial plans determine how the digits are interpreted and transmitted. They also
determine whether the dialed number is accepted or rejected. You can use a dial
plan to facilitate dialing or to block certain types of calls such as long distance or
international.
If the Cisco SPA 500 Series and WIP310 IP Phones are part of the Cisco SPA 9000
Voice System, dial plans are configured on the Cisco SPA 9000. In installations
where a Cisco SPA 9000 is not present (such as IP Centrex installations),
installations where the phones are removed from the SPA 9000 (such as by a
VPN), or other situations, dial plans can be configured on the IP phone using the
web administration user interface.
For more information on using dial plans on the Cisco SPA 9000 Voice System, see
the Cisco SPA 9000 Voice System Administration Guide. See the
"Where to Go From Here,"
This section includes information that you need to understand dial plans, as well as
procedures for configuring your own dial plans. This section includes the following
topics:
• About Dial Plans, page 168
• Editing Dial Plans on the IP Phone, page 178
This section provides information to help you understand how dial plans are
implemented.
The Cisco SPA 500 Series and WIP310 IP Phones and the SPA 9000 are involved
in applying various levels of the dial plans and process the digits sequence in the
same manner.
for the location of the document.
8
Appendix C,
168