Paging A Group Of Phones; Configuring Auto Answer (Cisco Spa 303); Monitoring/Accessing Another Phone From Your Phone (Cisco Spa 303) - Cisco 301 User Manual

Using Advanced Phone Features

Monitoring/Accessing Another Phone from Your Phone (Cisco SPA 303)

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Monitoring/Accessing Another Phone from Your Phone (Cisco
SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SIP)

Paging a Group of Phones

A phone can be configured to be part of a paging group. Each paging group has a
number associated with it. Your administrator must give you the number of the
groups that are configured. To page this group just dial the number of the paging
group.

Configuring Auto Answer (Cisco SPA 303)

To configure your phone to auto answer pages:
Press the Setup button.
Scroll to Preferences and press the select softkey.
Scroll to Auto Answer Page and press the edit softkey
Press the y/n softkey to choose yes.
Press the ok softkey.
Press the save softkey.
Your phone administrator may configure your phone so that you can monitor other
user's phones from your phone. If this feature is configured, some line buttons on
your phone are assigned to display the status of another user's phone. For
example, if your line 3 is configured to display Bob's phone line, the LED color
shows you the status of his phone line:
• Green: Line is idle.
• Red (steady): Line is active or in use.
• Red (blinking): Line is ringing.
• Orange (solid): Line status cannot be monitored.
• Orange (blinking): The phone is subscribing to monitor the line status.
4
63