Configuring The Cisco Spa 500S - Cisco SPA 525G User Manual

Using the Cisco SPA 500S Attendant Console

Configuring the Cisco SPA 500S

!
CAUTION
STEP 7
STEP 8
STEP 9
STEP 10
Configuring the Cisco SPA 500S
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SPCP)
Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA 500S.
Locate the AUX OUT port on the back of the first Cisco SPA 500S. Connect one
end of the auxiliary cable to this port.
Locate the AUX IN port on the back of the second Cisco SPA 500S. Connect the
other end of the auxiliary cable to this port.
Route the auxiliary cable inside the cable slot. The Cisco SPA 500S is powered by
the auxiliary cable with the Cisco SPA 525G/525G2; no additional power source is
required.
Attach the appropriate desktop stands to each unit.
The Cisco SPA 500S can be configured to easily access other phone lines in the
system. For example, buttons on the Cisco SPA 500S can be configured to monitor
another extension, speed dial a number, transfer calls to another extension, and
more.
5
82