Icom IC-2730E Instruction Manual page 79

■ VOX function
The VOX (Voice-Operated Transmission) function toggles
the transceiver between transmit and receive by your voice.
This function provides hands-free operation.
If the transceiver does not connect to a Bluetooth headset,
you cannot use the VOX function, even if the "VOX" item is
set to ON.
You can use the VOX function with the optional VS-3
Bluetooth .
headset
D Using the VOX function
1. Push [MENU ]C.
• Enters the MENU mode.
2. Rotate [DIAL]S to select "VOX" (VOX).
( MENU-EXMENU > EXMEN-BT SET > BTSET-HS SET >
HSSET-VOX > VOX-VOX)
3. Push [ï]D.
• Goes to the next tree level.
4. Rotate [DIAL]S to select "ON."
5. Push [MAIN BAND]S.
• Exits the MENU mode.
D Setting the VOX level
NOTE: We recommend you set the "MIC G" (MIC gain)
item in EXMENU or the headset's microphone gain level,
before setting the "VOX LV" (VOX level) item in EXMENU.
1.
2. Rotate [DIAL]S to select "VOX LV" (VOX level).
3. Push [ï]D.
4.
5. Push [MAIN BAND]S.
L If the VOX operation is intermittent, set the "VOX.DLY"
(VOX delay) item in EXMENU to an more stable value.
(p. 17)
Displayed
L When the VOX function is ON, you can also adjust the
VOX level by rotating [DIAL]S while transmitting.
Bluetooth
Push [MENU ]C.
• Enters the MENU mode.
( MENU-EXMENU > EXMEN-BT SET > BTSET-HS SET >
HSSET-VOX > VOX-VOX LV)
• Goes to the next tree level.
While speaking into the headset microphone, rotate
[DIAL]S to adjust the VOX level.
• Higher values make the VOX function more sensitive to your
voice.
• Displays "VOX" when the TX level audio is input. In this case,
the transceiver does not transmit.
• Exits the MENU mode.
11
® OPERATION
11
74