Icom IC-2730E Instruction Manual page 51

■ VFO and a Priority channel
D VFO frequency and a Priority channel
Checks the selected Priority channel every 5 seconds, while
receiving on a VFO frequency.
1. Set the VFO frequency. (p. 24)
2. Set the Priority channel. (p. 29)
• Select a Memory channel, Bank channel or Call channel.
3. Push [MENU ]C.
• Enters the MENU mode.
4. Rotate [DIAL]S to select "PRIO" (Priority scan).
5. Push [ï]D.
6. Rotate [DIAL]S to select "ON" or "Bell."
• ON: Starts Priority Watch.
• Bell: Starts Priority Watch.
When a signal is received on the Priority channel,
the " " icon is displayed.
7. Push [ï]D.
8. Push [MAIN BAND]S.
• Exits the MENU mode.
• The "PRIO" icon is displayed, and the Priority watch starts.
• To cancel the Priority watch, select "OFF" in step 6.
Example: Checks Memory channel "11" while receiving on
433.920 MHz.
Checks the Memory channel every 5 seconds.
D VFO scan and a Priority channel
Checks the selected Priority channel every 5 seconds,
during a VFO mode scan.
1. Do steps 1 through 8 as shown to the left.
• The "PRIO" icon is displayed, and the Priority watch starts.
2. Hold down [V/MHz SCAN]S for 1 second.
3. Rotate [DIAL]S to select a desired scan type.
4. Push [V/MHz SCAN]S.
• The VFO scan starts.
6
PRIORITY WATCH
Displayed
Priority
channel
6
46