Icom IC-2730E Instruction Manual page 50

6
PRIORITY WATCH
■ Priority watch
While operating on a VFO frequency or while scanning,
Priority watch checks for signals on a selected frequency
every 5 seconds.
L You can make a Priority watch independently on both the left and
right bands.
LThis section describes the MAIN band operation.
D VFO and a Priority channel (p. 46)
Checks the selected Priority channel every 5 seconds, while
receiving on a VFO frequency, or during a VFO mode scan.
A Memory channel, Bank channel or Call channel can be
selected as the Priority channel.
Selecting a Memory channel
VFO mode
Selected
Receive
M-CH
or scan
(5 seconds)
Selecting a Call channel
VFO mode
Receive
CALL-CH
or scan
(5 seconds)
45
Selecting a Bank channel
VFO mode
Selected
Receive
or scan Bank CH
(5 seconds)
D VFO and a Memory/Bank scan (p. 47)
Sequentially checks the Memory or Bank channels every
5 seconds, while receiving on a VFO frequency or during a
VFO mode scan.
A Memory scan or Bank scan can be selected.
Selecting a Memory scan
000
VFO mode
001
SKIP
Receive
002
or scan
(5 seconds)
999
M-CH
D isplay
S ide C enter S ide
Selecting a Bank scan
00
VFO mode
01
SKIP
Receive
02
or scan
(5 seconds)
99
Bank CH
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display