Icom IC-2730E Instruction Manual page 16

2
MENU MODE
■ Selecting the MENU item
In addition to this page, see pages 12 through 22 for details.
For your reference:
The MENU system is constructed in a tree structure. You
can go to the next tree level, or go back a level, depending
on the selected item.
Example: Set the tuning step
1. Push [MAIN BAND]S of the band that the tuning step
is set.
• Selects the Main band.
2. Push [MENU
• Enters the MENU mode.
3. Rotate [DIAL]S to select the "MENU-TS" (Tuning step)
item.
4. Push [ï]D.
• Goes to the next tree level.
• Pushing [►]D also goes to the next tree level.
11
]C.
5. Rotate [DIAL]S to select the desired value.
Selectable values (kHz):
5.0, 6.25, 8.33*, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0,
or AUTO*.
* Displayed only when the AIR band is selected.
6. Push [ï]D.
• Sets the selected value, and goes back to the previous tree level.
• Pushing [◄]D also goes back to the previous tree level.
7. Push [MAIN BAND]S.
• Exits the MENU mode.
• Pushing [V/MHz SCAN]S or [MR CALL]S also exits the
MENU mode.
To return to the default setting:
Hold down [MR CALL] after doing step 4.
L See the Icom website for details of the EXMENU mode
items.
D isplay
S ide C enter S ide
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display