Icom IC-2730E Instruction Manual page 39

■ Entering a Memory or Bank name
You can enter an alphanumeric name for each Memory
channel, Call channel, and Bank.
Names can up to 6 characters.
LThe operations are for the MAIN band.
1. Select a Memory channel to enter a name.
• To enter a Bank name, select a Bank group.
2. Push [MW]C to display the Memory entry screen.
3. Rotate [DIAL] to select "EDIT."
S
4. Push [ï]D.
5. Rotate [DIAL] to select "NAME."
S
• To enter a Bank name, select "B NAME."
6. Push [ï]D.
7. Rotate [DIAL] to select a desired character or symbol.
S
(Example: A)
When entering a Memory name
When entering a Bank name
MEMORY OPERATION
• Selectable characters and symbols:
[A] [B] [C] [D] [E] [F] [G]
[N] [O] [P] [Q] [R] [S] [T]
[0] [1] [2] [3] [4] [5] [6]
'
[$] [%] [&] [ ] [ ( ] [ ) ] [ ]
[ ] [<] [ = ] [>] [?] [@] [ [ ]
• Push [CLR]D to delete the selected character or symbol.
• When no character or symbol is selected, push [►](D) to
enter a space.
8. Push [◄] to move the cursor backwards, or push [►] to
move the cursor forwards.
9. Repeat steps 7 and 8 to enter a name of up to 6
characters, including spaces.
10. After entering, push [ï]D.
11. Rotate [DIAL]S to select "WRITE."
12. Push [ï]D.
• Displays "OVERW?."
13. Rotate [DIAL]S to select "YES."
14. Push [ï]D.
• Sounds beeps, writes the entered name to the channel, and
returns to the VFO mode.
For your reference: To display the entered name
Turn ON the "NAME" (Memory Name) item of EXMENU.
(MENU-EXMENU > EXMENU-DISP > DISP-NAME)
[H] [ I ] [J] [K] [L] [M]
[U] [V] [W] [X] [Y] [Z]
"
[7] [8] [9] [!] [ ] [#]
/
[ + ] [ , ] [ - ] [ . ] [ ] [ : ]
[ \ ] [ ] ] [ ^ ] [Space ]
4
4
34