Icom IC-2730E Instruction Manual page 76

11
Bluetooth
■ Operating Bluetooth
When you install the optional UT-133A Bluetooth
transceiver, you can connect to the optional VS-3 Bluetooth
.
headset
When you connect the VS-3 to the transceiver, you can
wirelessly transmit and receive the headset audio.
The VS-3 has a [PTT] switch, so you can transmit in the
same way as using the transceiver's [PTT] switch.
The VOX function can also be used, so you can toggle
transmit and receive by your voice through the headset.
You can assign a desired key function to the keys on the
side panel of the VS-3 to remotely operate the transceiver.
Communication range of Bluetooth is approximately
10 meters (32.8 ft).
UT-133A
Transceiver with
the Bluetooth unit
71
® OPERATION
®
in the
unit
Bluetooth Optional VS-3
(Bluetooth headset)
NOTE:
• Connect with a device that complies with the standards
set by Bluetooth SIG and has been certified. Even if
the device complies with the Bluetooth standard, it may
not be able to connect to the receiver, depending on
the specifications and settings of the device, and not all
operations are guaranteed.
• The Bluetooth communication range may vary, depending
on the environment in which the device operates.
Microwave ovens or Wireless LANs may cause
interference. In that case, stop using those devices or
move away from them.
The Bluetooth headset has a range of use. If the
communication is unstable, use the device within the range.
■ Electromagnetic Interference
When you use a Bluetooth device, pay attention to the following:
Bluetooth devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
Wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using the Bluetooth device near such devices,
interference may occur, causing a decrease in
communication speed, and an unstable connection.
In such cases, use this device away from the other devices,
or stop using those devices.