Icom IC-2730E Instruction Manual page 60

8
OTHER FUNCTIONS
■ Transmitting DTMF code
D Transmitting DTMF code (DTMF Memory)
1. Hold down [LOW DTMF]C for 1 second.
• Enters the DTMF Menu mode.
2. Rotate [DIAL]S to select "TX" (DTMF Transmit).
3. Push [ï]D.
• Displays the DTMF Memory Selection screen.
4. Rotate [DIAL]S to select a desired DTMF Memory
channel.
5. Push [ï]D.
• Transmits the selected DTMF code, and exits the DTMF
Menu mode.
D isplay
S ide C enter
55
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
S ide
D: Display
D Transmitting DTMF code (Direct Input)
1. Hold down [LOW DTMF]C for 1 second.
• Enters the DTMF Menu mode.
2. Rotate [DIAL]S to select "TX" (DTMF Transmit).
3. Push [ï]D.
• Displays the DTMF Memory Selection screen.
4. Rotate [DIAL]S to select "DIRECT" (DTMF Direct input).
5. Push [ï]D.
• Enters the DTMF Code Entry mode.
6. Enter a desired DTMF code as described on page 54.
7. After entering, push [ï]D.
• Transmits the entered DTMF code, and exits the DTMF Menu
mode.
For your reference:
• While transmitting, push [LOW DTMF]C to cancel the
transmission.
• You can directly transmit a DTMF code by pushing a
10-keypad key on the HM-207 while holding down [PTT].