Icom IC-2730E Instruction Manual page 78

11
Bluetooth ®
■ Pairing with a headset
This section describes how to pair with a Bluetooth headset.
1. Turning ON Bluetooth of the transceiver
1. Push [MENU
• Enters the MENU mode.
2. Rotate [DIAL]S to select "BT" (Bluetooth).
(MENU-EXMENU > EXMEN-BT SET > BTSET-BT)
3. Push [ï]D.
• Goes to the next tree level.
4. Rotate [DIAL]S to select "ON."
5. Push [ï]D.
2. Entering the pairing mode of the VS-3
LSee the VS-3's instruction manual for details.
3. Entering the pairing mode of the transceiver
6. Rotate [DIAL]S to select "PAIR" (Paring).
(MENU-EXMENU > EXMEN-BT SET > BTSET-PAIR)
7. Push [ï]D.
• "PAIRING" blinks, and pairing starts.
• While connecting, "CONNECTING" blinks.
• After the connecting to the headset, "CONNECTED" is
displayed.
8. Push [MAIN BAND]S.
• Exits the MENU mode.
• Displays the Bluetooth icon while connected to a Bluetooth
headset.
73
OPERATION
]C.
For your reference:
When the transceiver cannot find any available headset,
and "FAILED" is displayed, push [ï]D to search again for
a headset.
For your reference:
The "AT CON" (Auto Connect) item is set to ON as the
default, so the transceiver automatically connects to the
paired headset when the headset power is ON. (p. 16)
D isplay
S ide C enter S ide
Displayed
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display