Icom IC-2730E Instruction Manual page 58

8
OTHER FUNCTIONS
■ Home Channel Beep function
When you select a Home channel by rotating [DIAL]S, a
beep sounds. You will know the Home channel is selected
without looking at the display.
In the AIR band, the Home channel beep sounds only when
the frequency or the operating mode (AM or AM-N) same as
the Home channel is selected.
D Setting the Home channel
A Home channel can be set in both the VFO mode and
Memory mode.
1. Set a desired frequency and operating mode to be set as
a Home channel in the VFO or Memory mode. (p. 23)
2. Push [MENU
• Enters the MENU mode.
3. Rotate [DIAL]S to select "HOMECH" (Home channel).
4. Push [ï]D.
• Goes to the next tree level.
5. Rotate [DIAL]S to select "SET.FRQ" (Frequency
setting) or "SET CH" (Channel setting).
Frequency setting
53
]C.
Channel setting
6. Push [ï]D.
• Beeps sound.
• Sets the Home channel, and exits the MENU mode.
D Home channel operation
After setting the Home channel, rotate [DIAL]S in the VFO
or Memory mode.
When the Home channel is selected, a beep sounds.
For your reference:
• When you push [HOME CALL] on the supplied HM-207,
you can select the Home channel.
• You can turn OFF the Home Channel Beep function in
the "HOME B" (Home channel beep) item of EXMENU.
(p. 16)
For your reference:
You can clear the Home channel setting.
z Rotate [DIAL]S to select "Clear" in step t as shown to
the left, and then push [ï]D.