Icom IC-2730E Instruction Manual page 21

Sound items
Sets the Sound options.
Beep level
Sets the beep output level.
Key-touch beep
Sets to sound a beep when you push a key.
• The beep tones are different between on the left band and the
right band.
Home channel beep
Sets to sound a beep when you select the Home channel.
Band edge beep
Sets to sound a beep when you tune into or out of the AIR, VHF
and UHF band's frequency range by rotating [DIAL].
Scan stop beep
Sets to sound a beep when a scan stops by receiving a signal.
Sub band mute
Selects to mute the SUB band audio signal while receiving on the
MAIN band, and/or sound a beep when a signal disappears on
the SUB band.
Home channel items*
Sets the often-used frequency as the Home channel in the VFO
mode or Memory mode.
Setting
Sets a displayed frequency (and operating mode for AIR band)
as a Home channel.
Clear
Deletes the current Home channel.
This item is not displayed when no Home channel is set.
Bluetooth items
Sets the Bluetooth options when you use a Bluetooth headset.
Bluetooth
Turns the Bluetooth function ON or OFF.
Auto Connect
Sets to automatically connect to the paired Bluetooth headset
when the headset power is ON.
Connection
Displays the paired Bluetooth headsets.
You can manually connect to a selected headset.
Disconnection
Disconnects from the connected Bluetooth headset without
cancelling the pairing.
Paring
Makes the transceiver to enter the pairing mode to pair with a
Bluetooth headset.
Headset Set
AF output
Selects the AF output option for when you use the Bluetooth
headset.
Headset function setting
Selects a desired PTT and microphone combination when both
a Bluetooth headset and the transceiver microphone are used.
* You can set in the MENU mode.
2
MENU MODE
2
16