Changing The Power Saver Mode Time Interval - Xerox 4112 System Administration Manual

Product Overview

Changing the Power Saver Mode time interval

To activate the Power Saver feature, set the Sleep Mode button to Enabled, and set the Low
Power Mode and the Sleep Mode time intervals as follows:
Note
The amount of time that passes before the machine enters Low Power Mode and Sleep Mode
can be specified in 1 minute increments, from 1 to 240 minutes for each mode.
1. Enter the System Administrator Mode (Chapter 1 Entering the System Administrator mode
on page 1-10.)
2. Select System Settings and then select Common Settings.
3. Select Machine Clock /Timers.
Xerox 4112/4127 Copier/Printer 1-13
System Administration Guide