Changing The Default Copy Settings; Changing The Color Mode; Changing The Auto Exposure Level - Xerox 6015/NI User Manual

Changing the Default Copy Settings

This section includes:


Changing the Color Mode ........................................................................................................................................... 101



Changing the Auto Exposure Level ......................................................................................................................... 101


Changing the Color Balance ...................................................................................................................................... 102

Changing the Manual Feed Slot Paper Size ......................................................................................................... 102
The printer uses the default copy settings on all copy jobs unless you change them for an individual job.
You can modify the default copy settings.
To change the default copy settings:
1. On the control panel, press the System button.
To select Default Settings, press the arrow buttons, then pressOK.
2.
3. Select Copy Defaults, then press OK.
4. To select the option you want to change, press the Down Arrow button, then press OK.
5. Select the desired setting, then press OK to confirm the new setting.
6. Repeat steps 4 and 5 as needed to change the defaults.
To return to the Ready screen, press Return.
7.
Changing the Color Mode
To select Color, press the arrow buttons, then press OK.
1.
2. Select a color setting:

Black & White

Color
3. Press OK.
Changing the Auto Exposure Level
1. To select Auto Exposure Level, press the arrow buttons, then press OK.
2. Select an auto exposure setting:

Off

On
The default setting is On.
3. Press OK.
WorkCentre 6015 Color Multifunction Printer
Copying
101
User Guide