Changing Intelligent Ready Mode - Xerox C2424 - WorkCentre Color Solid Ink User Manual

3. Select System Controls, then press the Enter button.
4. Select Power Saver
5. Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the system goes
into Power Saver mode.
6. Press the Enter button.
Using CentreWare IS
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Click the General folder on the left sidebar, then click Warmup.
5.
Select a value from the Power Saver Timeout drop-down list to change the setting.
6.
Click Save Changes at the bottom of the page.

Changing Intelligent Ready Mode

Intelligent Ready mode is an automated system that:
■ Monitors the system's usage.
■ Warms up the system when you are most likely to need it based on past usage patterns.
To turn on/off Intelligent Ready mode, use either:
■ The control panel
CenterWare IS
■
Using the Control Panel
To turn Intelligent Ready mode on/off:
1. On the control panel, press the System Setup button.
2. In the menu, select General
3. Select System Controls, then press the Enter button.
4. Select Intelligent Ready.
5. Select On or Off, then press the Enter button.
Timeout, then press the Enter button.
Setup, then press the Enter button.
WorkCentre® C2424 Copier-Printer
1-16
System Settings