MICRO-EPSILON interferoMETER IMS5420 Quick Manual page 28

Disclaimer
All components of the device have been checked and tested for functionality in the factory. However, should any defects
occur despite careful quality control, these shall be reported immediately to MICRO-EPSILON or to your distributor /
retailer.
MICRO-EPSILON undertakes no liability whatsoever for damage, loss or costs caused by or related in any way to the
product, in particular consequential damage, e.g., due to
- non-observance of these instructions/this manual,
- improper use or improper handling (in particular due to improper installation, commissioning, operation and mainten-
ance) of the product,
- repairs or modifications by third parties,
- the use of force or other handling by unqualified persons.
This limitation of liability also applies to defects resulting from normal wear and tear (e.g., to wearing parts) and in the
event of non-compliance with the specified maintenance intervals (if applicable).
MICRO-EPSILON is exclusively responsible for repairs. It is not permitted to make unauthorized structural and / or techni-
cal modifications or alterations to the product. In the interest of further development, MICRO-EPSILON reserves the right
to modify the design.
In addition, the General Terms of Business of MICRO-EPSILON shall apply, which can be accessed under Legal details |
Micro-Epsilon https://www.micro-epsilon.com/legal-details/.
For translations into other languages, the German version shall prevail.
MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Koenigbacher Str. 15 · 94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0 · Fax +49 (0) 8542 / 168-90
info@micro-epsilon.com · www.micro-epsilon.com
Your local contact: www.micro-epsilon.com/contact/worldwide/
X9691463-A012045MSC
MICRO-EPSILON MESSTECHNIK