MICRO-EPSILON interferoMETER IMS5420 Quick Manual page 12

Initial Operation
Initial Operation
i
Initializing starts after the voltage supply has been
switched on. The measuring system is ready for
use after approx. 10 seconds. To ensure precise
measurements, let the measuring system warm up
for approx. 60 minutes.
The controller is factory set to the static IP address
169.254.168.150. Use this address for a direct connec-
tion with a browser.
The start screen of the controller software is now dis-
played in the web browser.
You can check the IP address of the controller, that are
connected to a PC / network, with the sensorTOOL.exe
program. This program is available online at
https://www.micro-epsilon.com/download/software/sen-
sorTOOL.exe.
IMS5420-TH / IMS5420MP-TH / IMS5420IP67-TH / IMS5420IP67MP-TH
Start the program sensorTOOL and click the button
.
Click the Open Website button to connect the
controller to your default browser.
Select a Sensor
Change to the Settings > Sensor menu.
Select a sensor from the list.
Page 12