6. Remove the blank drive bezel from the inside of the front
7. Replace the front bezel and computer access panel.
8. Reconfigure the computer, if necessary. Refer to Appendix
Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay
1. If you have locked the Smart Cover Lock, use Computer
2. Shut down the operating system properly, turn off the
bezel.
B, "Computer Setup Utilities," for more information.
If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the Smart Cover
Sensor.
Setup to unlock the lock and disable the Smart Cover
Sensor.
computer, disconnect the power cord from the electrical
outlet, and remove the computer access panel and front
bezel.
Making Hardware Changes
5-21