4-28
Upgrading the Compaq Deskpro EN Series, Desktop Model
6. With the drive cage rotated to its upright position, connect
the drive power 1 and signal 2 cables.
Refer to Appendix C, "Hard Drive Installation
Guidelines," for more information.
Connecting the Drive Cables
7. Gently rotate the drive cage back into the computer chassis.
CAUTION:
When returning the drive cage to its normal position,
use extreme caution to prevent damaging the data and power
cables.
8. Remove the blank drive bezel from the inside of the front
bezel.
9. Replace the computer cover.