Removing A Drive From The Drive Bay - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual
Making hardware changes - compaq deskpro family of personal computers
Hide thumbs
Also See for 159715-002 - Deskpro EN - DT 6650 Model 10000:
- Maintenance and service manual (103 pages) ,
- Software reference manual (58 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
Removing a Drive
from the Drive Bay
2-28
Upgrading the Compaq Deskpro EP Series
1. Shut down the operating system properly, then turn off
the computer, disconnect the power cord from the
power outlet, and remove the computer access panel.
2. Remove the front bezel.
3. Disconnect the drive power and signal cables and, if it is a
CD-ROM, DVD-ROM, or PD-CD drive, disconnect the
audio connector.
4. Press drivelock mechanisms (1 or 2) to unlock the drive
in the drive bay.
Drivelock 1 Secures the 5.25-Inch Drives in the Desktop and 2 Secures All Drives in the
Minitower (Shown from the Rear of the Chassis)
Hide quick links:
Advertisement
Table of Contents
