Changing from a Desktop to a Minitower Configuration
1. Shut down the operating system properly, then turn off the
2. Remove the computer access panel.
3. Remove the front bezel.
4. Disconnect all power and data cables from the drives in the
5. To release the drives from the 5.25-inch drive bay, press
Activating the Drivelocks (Shown from the Rear of the Chassis)
6. While pressing the drivelock, pull the drives out of the
7. Before you install each drive into the chassis, turn it so that
computer and any external devices. Disconnect the power
cord from the power outlet and disconnect any external
devices.
5.25-inch drive bays.
the short (yellow) drivelock 1 as shown.
drive bay.
it is in the same orientation as the internal 3.5-inch drive.
The bottom of the drive should be parallel to the
drivelock 1.
Making Hardware Changes
2-5