Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual page 130

Computer Setup
Continued
Heading Option
Advanced* Power-On Options
Onboard Devices
PCI Devices
* These options should be used by advanced users only.
B-8 Computer Setup Utilities
Description
Allows you to set:
POST mode (QuickBoot, FullBoot, or FullBoot
every 1-30 days)
POST messages (enable/disable)
Safe POST (enable/disable)
F10 prompt (enable/disable)
F12 prompt (enable/disable)
Option ROM prompt (enable/disable)
Remote wakeup boot sequence (remote
server/local hard drive)
After power loss (off/on)
If you connect your computer to an electric
power strip, and would like to turn on power to
the computer using the switch on the power
strip, set this option to on.
Note: If you turn off power to your computer
using the switch on a power strip, you will not be
able to use the suspend/sleep feature or the
Remote Management features.
UUID (Universal Unique Identifier)
(enable/disable)
Allows you to set resources for or disable onboard
system devices (diskette controller, serial port,
parallel port).
Lists currently installed PCI devices and their
IRQ settings.
Allows you to reconfigure IRQ settings for these
devices or to disable them entirely.
Continued