7.
Pull the locking lever on the left side of the drive to the left
(facing the front of the computer). Slide the drive to the
rear of the bay, then lift the drive from the bay.
Removing the Hard Drive (Shown from the Rear of the Chassis)
When replacing the hard drive, transfer the four screws
from the old drive to the new one. There are two
shoulder-head screws on the left side of the drive and two
hi-top screws on the right side. The screws take the place
of drive rails.
If you have installed a hard drive that is not automatically
recognized by the computer, refer to Chapter 1,
"Installation Guidelines."
Making Hardware Changes
3-15