Sliding Out the System Board Tray
5-4
Upgrading the Compaq Deskpro EN Series, Minitower Model
The slide-out system board tray allows you to quickly remove
the system board, without using tools.
WARNING:
Before removing the computer access panel, ensure
!
that the computer is turned off and that the power cord is
disconnected from the electrical outlet.
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock and disable the Smart Cover
Sensor.
2. Shut down the operating system properly, then turn off the
computer and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the computer access panel and turn the minitower
on its side, with the open side up.
5. Raise the expansion card cage into service position 2. You
do not need to remove the cage from the chassis.