Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual page 124

Establish an Ownership Tag, the text of which is
displayed each time the system is turned on or restarted.
Enter the Asset Tag or property identification number
assigned by your company to this computer.
Enable power-on password prompting during system
restarts (warm boots) as well as during power-on.
Establish a setup password that controls access to
Computer Setup (F10) and the settings described in this
section.
To secure the serial, USB, or parallel ports so that they
cannot be used until they are unsecured.
Enable or disable removable media boot ability.
Enable or disable removable media write ability.
Solve system configuration errors detected but not
automatically fixed during the Power-On Self-Test
(POST).
Replicate your system setup by saving system
configuration information on diskette and restoring it on
one or more computers.
Execute self-tests on a specified IDE hard drive.
Configure various energy-saving features including
energy saver mode, system and hard drive timeouts,
power button mode, power LED behavior, and fan
speed selection.
B-2 Computer Setup Utilities