Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual page 125

Using Computer Setup Utilities
To access the Computer Setup Utilities menu, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows,
2. When the F10=Setup message appears in the lower-right
3. Select your language from the list and press the Enter key.
4. Using the arrow keys or the Tab key, select the option you
5. To apply and save changes, select File Æ Save Changes
click Start Æ Shut Down Æ Restart the Computer.
corner of the screen, press the F10 key.
If you do not press the F10 key while the message is displayed,
you must turn the computer off, then on again, to access the utility.
A choice of five headings appears in the Computer Setup
Utilities menu: File, Storage, Security, Power, and
Advanced.
want and press the Enter key. To return to the Computer
Setup Utilities menu, press the Esc key.
and Exit.
If you selected an option that automatically restarted
the computer, changes were applied at that time.
If you have made changes that you do not want
applied, select Ignore Changes and Exit.
If you have already applied changes you now want to
eliminate, select Set Defaults and Exit. This option will
restore the original factory system defaults.
Making Hardware Changes B-3