Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay
1. Shut down the operating system properly, then turn off the
2. Remove the front bezel.
3. Install one guide screw on the right side of the drive.
4. Insert the drive into the adapter 2 so that the guide screw
5. Snap on the brace 1, and attach the drive bezel 3 to the
Attaching a 3.5-Inch Drive to the 5.25-Inch Adapter
computer and any external drives, disconnect the power
cord from the power outlet, and remove the computer
access panel.
aligns in the slot, and then attach with two retaining screws.
front of the adapter.
Making Hardware Changes
2-25