Upgrading The Hard Drive - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual
Making hardware changes - compaq deskpro family of personal computers
Hide thumbs
Also See for 159715-002 - Deskpro EN - DT 6650 Model 10000:
- Maintenance and service manual (103 pages) ,
- Software reference manual (58 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
Upgrading the Hard
Drive
3-14
Upgrading the Compaq Deskpro EN Series, Small Form Factor
The 3.5-inch hard drive is located on the right side of the
computer. To remove and replace the drive:
1.
If you have locked the Smart Cover Lock, use Computer
Setup to unlock it.
2.
Turn off the computer and any external devices.
3.
Disconnect the power cord from the power outlet, and
disconnect any external devices.
4.
Remove the computer cover.
5.
Remove the CD-ROM drive.
To access the hard drive, you must remove the CD-ROM
drive.
Disconnect the 1 power cable and 2 signal cable from the
6.
back of the drive.
Disconnecting Cables from the Hard Drive
Hide quick links:
Advertisement
Table of Contents
