Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay
1.
Shut down the operating system properly, then turn off the
computer and any external drives, disconnect the power cord from
the power outlet, and remove the computer access panel.
2.
Remove the front bezel.
3.
Install one guide screw on the right side of the drive.
4.
Insert the drive into the adapter
the slot, and then attach with two retaining screws.
5.
Snap on the brace
, and attach the drive bezel
the adapter.
Attaching a 3.5-Inch Drive to the 5.25-Inch Adapter
so that the guide screw aligns in
to the front of
Hardware Reference Guide 2-21