Tilting The Drive Cage - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual

Tilting the Drive Cage

The tilt drive cage allows access to all drive bays for easy
installation of additional drives, requiring no drive rails or
brackets. With the drive cage tilted out from the chassis, you can
easily connect the drive power and signal cables.
!
1. If you have locked the Smart Cover Lock, use Computer
2. Shut down the operating system properly, then turn off the
The configuration label located inside the computer cover
provides additional information.
Another label located inside the computer chassis
provides information about diagnosing computer
conditions using the power and hard drive LEDs.
When installing optional drives, you must install guide
screws to ensure the drive will line up correctly in the
drive cage. Compaq has provided extra guide screws,
installed in the front of the computer chassis, under the
front bezel.
WARNING:
Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
Setup to unlock the lock and disable the Smart Cover
Sensor.
computer and any external devices.
Making Hardware Changes 4-3