Memory Module Installation
3-10
Upgrading the Compaq Deskpro EN Series, Small Form Factor
CAUTION:
Your memory module sockets have gold metal
contacts. When upgrading your memory, it is important to use
memory modules with gold metal contacts to prevent corrosion
and/or oxidation resulting from having incompatible metals in
contact with each other.
CAUTION:
Static electricity can damage the electronic com-
ponents of the computer or optional cards. Before beginning these
procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object. Refer to Appendix F,
"Electrostatic Discharge," for more information.
CAUTION:
When handling a memory module, be careful not to
touch any of the contacts. Doing so may damage the module.
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock.
2. Shut down the operating system properly, then turn off the
computer and any external devices, then disconnect the
power cord from the power outlet.
3. Remove the computer cover.
4. Push in on the side of the easy access drive bay 1 and
rotate the drive bay to an upright position 2.
CAUTION:
Check the position of all cables and wires before
raising or lowering the easy access drive bay to prevent damage.