Raising The Expansion Card Cage - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual
Making hardware changes - compaq deskpro family of personal computers
Hide thumbs
Also See for 159715-002 - Deskpro EN - DT 6650 Model 10000:
- Maintenance and service manual (103 pages) ,
- Software reference manual (58 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
Raising the Expansion Card Cage
5-2
Upgrading the Compaq Deskpro EN Series, Minitower Model
5. Use the hand hold to slide the panel to the back of the
computer about 2-inches (5.0-cm) and lift out to remove.
Removing the Computer Access Panel
The configuration label located inside the computer
access panel provides additional information.
Another label located inside the computer chassis
provides information about diagnosing computer
conditions using the power and hard drive LEDs.
The expansion card cage, with green lift levers, allows quick
removal of expansion cards. In most cases, you will not need to
completely remove the expansion card cage from the chassis.
WARNING:
Before removing the computer access panel, ensure
!
that the computer is turned off and that the power cord is
disconnected from the electrical outlet.
Hide quick links:
Advertisement
Table of Contents
