Turn on power to the system and the device.
6.
NOTE
to print. See the printer guide for instructions.
Serial Mouse Use
In addition to the standard PS/2-style mouse, your system
also supports a serial mouse. To use a serial mouse, you
must make a few software adjustments to allow your system
to recognize the serial mouse.
NOTE
for instructions about attaching a serial mouse.
Prepare your system for serial mouse installation as
follows:
Turn off system power and attach the serial mouse to the
1.
external COM port on the back of the system.
Power on your system and boot into Windows.
2.
Go to one of the next sections and follow the instructions
3.
that are appropriate for your system (either Windows 95
or Windows for Workgroups).
Windows 95 Systems
Follow these instructions to add a serial mouse to your
Windows 95 system.
From the Windows 95 Start menu, select Settings and
1.
then Control Panel.
4-34 Using Your NEC Versa
Make sure your printer is online before trying
See the preceding section, "Serial Devices,"