In addition to the CD-ROM reader, the VersaBay II accepts the following
options:
T
a second battery pack
T
a second hard disk drive
T
the LS-120 SuperDisk drive.
See the Versa Tools: Accessories and Solutions Catalog or your authorized
NECCSD dealer for details about these VersaBay II options.
Removing a Device from the VersaBay II
Use the following steps to remove the standard diskette drive, SuperDisk
LS-120 drive, or other device from the VersaBay II.
Make sure the NEC Versa is powered off , all options are disconnected,
1.
and the LCD panel is closed.
Your system must be powered off before removing or inserting
devices in the VersaBay II.
Turn the system upside down.
2.
Locate the VersaBay II release latches on the bottom of the unit.
3.
!
CAUTION
Using Your NEC Versa 4-7