Bios Setup Menus - NEC Versa LX User Manual

Parameter
Internal Hard Drive
USB Controller
Serial Port
Parallel Port
Parallel Mode
IR Serial Port
Notes:
1 These setup items will only be visible when system is cold docked.
2 These setup items will only be changeable when power savings is set to custom. Otherwise, they will
display settings based upon the following power savings defined setting table.
3 Greyed out until supervisor password is set up.
4 Only active after a password is set up.
5 Resume alarm time is selectable when wake up from suspend alarm is set.
6 Bootable device when set to IDE Hard Drive. Only one IDE device is allowed to be bootable. Appears
only
when configured by Windows 95 device manager.

BIOS Setup Menus

Read the following descriptions for explanations of items that appear in the
BIOS Setup menus, as listed in the preceding table. See the item-specific help
that appears on the Setup screen for more details.
Standard CMOS Setup
When you select the Standard CMOS Setup screen you will see System Time
and System Date parameters as well as drive parameters.
n
Date — Set your Versa's calendar month, day and year. The calendar
clock is year 2000-compliant. These settings remain in memory even
after you turn off system power.
2-18 System Configuration and Setup
BIOS Setup Parameters
Default Setting
Enabled
Disabled
Auto
Auto
ECP
Disabled
Alternate Setting(s)
Disabled
Enabled
Enabled
Disabled
Disabled
COM1, IRQ4
COM2, IRQ3
COM3, IRQ4
COM4, IRQ3
Auto
(PnP OS Setup)
Disabled
LPT1
LPT2
Auto
(PnP OS Setup)
Uni-Dir
Bi-Dir
EPP
ECP
Disabled
COM2, IRQ3
COM3, IRQ4
COM4, IRQ3
Auto
(PnP OS Setup)