Connecting IDE drive cables
A – IDE Cable
If you are installing a CD-ROM drive or DVD-ROM drive and your
4.
system has speakers, connect the audio cable to the CD In connector
on the riser board or an audio board (see the instructions that come
with the drive).
Diskette Drive Cabling
The following procedure explains how to cable a diskette drive.
1.
Connect the diskette drive signal cable connector to the signal
connector on the diskette drive.
Locate an available power connector coming from the power supply.
2.
Connect the power cable to the power connector on the device.
3.
B – Power Cable
Installing Options 5-47