VGA monitor connector
!
The system comes with an AGP board connected to the system board.
The AGP board provides an external VGA connector. AGP boards
available from NECC support an NEC MultiSync
™
VistaScan
monitor, or other video graphics array (VGA)-compatible
monitor with a 15-pin connector. Attach the signal cable from your
monitor to the VGA connector on the AGP board.
Printer port
!
Use this port to connect a parallel printer with a 25-pin connector to
the system.
Serial ports (COM1 and COM2)
!
Attach a serial device with a 9-pin connector to each serial port. Serial
devices include a pointing device, serial printer, or a modem.
Audio connectors
!
The following connectors come integrated on the system board (see
the following figures):
— Microphone in jack
The microphone in jack lets you connect a microphone for
recording audio information in your data system files.
— Line in jack
The line in jack lets you connect a stereo audio device such as a
stereo amplifier or a cassette or minidisc player for playback or
recording.
— Line out jack
The line out jack allows you to connect an amplified output
device, such as powered speakers, a stereo tape recorder, or an
external amplifier for audio output. If you ordered speakers, use
this jack to connect them.
®
monitor, NEC
Reviewing System Features 1-9