Table of Contents
Advertisement
Remove the perforated metal plate from the selected slot on the
5.
chassis by pulling the plate back and forth until it releases (see the
following figure).
Locating the breakaway panel
6.
Install the device (see "Installing a 5 1/4-Inch Device").
Replacing the Desktop Front Panel
If a 5 1/4-inch device has been removed from your system, you need to
replace the blank panel before replacing the front panel. The blank panel
covers the opening previously used by the device.
Replace the desktop front panel as follows.
Replace the blank panel if necessary. Press the blank panel into the
1.
inside of the front panel, aligning the panel with the empty slot. Press
the panel into the slot until the four tabs lock the panel in place.
2.
Align the four front panel tabs with the holes in the front of the
system unit (see the following figure).
Squeeze the locking tabs and evenly press the front panel into
3.
position until the locking and pop-in tabs lock the panel in place.
5-52 Installing Options
A – Breakaway Blank Panel
Advertisement
Table of Contents
